Sample Sidebar Module

This is a sample module published to the sidebar_top position, using the -sidebar module class suffix. There is also a sidebar_bottom position below the menu.

Sample Sidebar Module

This is a sample module published to the sidebar_bottom position, using the -sidebar module class suffix. There is also a sidebar_top position below the search.
Eagle Series

Swing Tube Concrete Pump For Large Rock


Applications

  • Slurries to 1/2" Aggregate Mixes

  • Shotcrete

  • Auger Cast Pilings

  • Mud Jacking

  • Slabs

  • Pressure Grouting

  • Decks

  • Masonry Grout

  • Footings

  • Tiebacks

  • Lightweight Aggregate

  • Lightweight Foam


Features

  • Hydraulic oil cooler

  • Oil flushed piston cups changes through flush box

  • Dual axle and 12" electric or hydraulic brakes

  • Screw type front jack stand

  • Drop forged S Tube shaft, 3 1/2 bearing and replaceable wear sleeves

  • Sundstrand closed loop over center hydraulics

  • Reducer and heavy duty snap clamps

  • Big, full size 7" inlet to material cylinders with 7" x 5" cast S Tube



Standard Specifications

  • Hopper remixer and screen

  • Hydraulic oil cooler

  • Fenders with full D.O.T. Lighting

  • 2 5/16" ball or pintle ring trailer coupling

  • Engine hood

  • Screw type front jack stand

  • Reducer and heavy duty snap clamp

  • Full manual override on complete hydraulic circuit



Optional Features

  • Rear hydraulic outriggers

  • Front hydraulic outriggers

  • Auto compensator

  • Cordless remote control

  • Truck mounted



EAGLE   P-80 EAGLE   P-120
ENGINE Deutz BF4M1013 Engine 120 HP Deutz BF6M1013 Engine 180 HP
OIL PUMPS Sundstrand 100 cc variable volume piston pump on main rams, with a 33 cc fixed volume pump on the 'S' Tube circuit. Sundstrand 100 cc variable volume piston pump on main rams, with a 33 cc fixed volume pump on the 'S' Tube circuit.
HOPPER Big full size 7" inlet to material cylenders with 7"x5" cast S-tube. Heavy duty 5" outlet, 90° bend and snap clamp. Drop forged S-Tube shaft, 3 1/2" bearing and replaceable shaft wear sleeve. Big full size 7.5 " inlet to material cylenders with 7.5"x 5" cast S-tube. Heavy duty 5" outlet, 90° bend and snap clamp. Drop forged S-Tube shaft, 3 1/2" bearing and replaceable shaft wear sleeve.
CONCRETE CYLINDERS 2 Hardchrome 7" x 45" 2 Hardchrome 8" x 57"
HYDRAULICS Closed loop 'over centre' main circuit with variable volume control at the operator panel. Tank mounted hydraulic valve block for 'S' tube circuit. 1 Gal. accumulator. Hopper inter-lock on the hopper grating. Instant reverse on the main rams. Instant emergency stop button. 10 micron suction filter and 10 micron in-line high pressure filter. Oil cooler as standard. Closed loop 'over centre' main circuit with variable volume control at the operator panel. Tank mounted hydraulic valve block for 'S' tube circuit. 1 Gal. accumulator. Hopper inter-lock on the hopper grating. Instant reverse on the main rams. Instant emergency stop button. 10 micron suction filter and 10 micron in-line high pressure filter. Oil cooler as standard.
CONTROL LOGIC Solid state 30 mm proximity switches, 10 amp relays.  No circuit board, simple electric wiring with easy to obtain and replace DIN standard relays. Solid state 30 mm proximity switches, 10 amp relays. No circuit board, simple electric wiring with easy to obtain and replace DIN standard relays.
CHASSIS 2" x 5" chassis, dual torsion bar suspension. Site trailer with brakes. 2" x 5" chassis, dual torsion bar suspension. Site trailer with brakes.